PRESSCOMFORT is an automatic electronic device, designed to
regulate the functioning of the electric pumps without using expansion tanks.
Ther pump automatic starts and stop when a tap or valve
connected to the installation opens or closes respectively.
When the pump is started, it continues until any tap connected
remains open, transmitting the requested flow rate at constant pressure
to the network.
If there is no liquid at the suction, the pump stops automatically.
PRESSCOMFORT allows:
-manual restore (RESET key)
-automatic restore after 1, 6, 12, 24 hours.
When a pressure exceeding (1.5 bar) for pump start-up, PRESSCOMFORT is restored automatically.
TECHNICAL DETAILS
Automatic regulation
Incorporated non-return valve
Functioning indicator
TECHNICAL DATA
Maximum temperature of the water: 60° C
Maximum flow rate: 10,000 I/h
Start-up pressure: 1.5 -2.5 bar
Maximum use pressure: lObar
Power supply voltage: 220/240V -50/60 Hz
Maximum current intensity: 10(6)A
IP65 Protection rating
G 1 connections (pump and outlet side)
The Part number is different
The minimum pressure these pumps require is 2 meter's, if you do not have 2 meter’s differential from water level to discharge point,or a minimum of 14 meter's horizontal run, then use a 1" bore discharge hose or your motor will burn out
What is the lowest head pressure
Part numbers have changed to harmonise along with design changes. The part number stated is the current one in use, there are different numbers for OEM products also, if you have any doubts please advise the part number and we will confirm.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK Mainland Delivery is normally by next working day courier if order is placed before 1.30pm. ie despatched on Monday for Tuesday delivery. If placed after 1.30pm then the goods will be despatched the next working day. ie Monday for Wednesday delivery. Highlands and offshore deliveries differ.
